Filter
Top Products
Configuration4–12
Option 23 — Automatic Line Feed on Carriage Return
Discussion
Carriage return (0DH) does not cause a line feed and the character line is not
printed in the default configuration. The character line must be terminated
with a Form Feed, Line Feed, or EVFU (Electronic Vertical Format Unit)
command before it is printed. In other configurations, carriage return
generates 1, 2, or 3 line feeds.
MVP/L150
Option
Number
Display Configuration
Description
.0 23.0 CR = 0 line feed (default)
.1 23.1
CR = 1 line feed
.2 23.2
CR = 2 line feeds
.3 23.3
CR = 3 line feeds
NOTE: The Underline feature, Configuration Option 28, cannot be used if
option 23.1–.3 is selected. These options set CR equal to one, two,
or three line feeds, respectively, and cause the printer buffer
contents to be printed before the underlines can be loaded into the
buffer. The underlines are then printed one, two, or three lines
below the desired position. A line terminator other than a carriage
return (e.g, FF or EVFU terminator) must be used if 23.0 is not
selected.
150B/L150B
Option
Number
Display Configuration
Description
.0 23.0 No line feed on CR (default)
.1 23.1
CR = 1 line feed
.2 23.2
CR = 2 line feeds
.3 23.3
CR = 3 line feeds
NOTE: Use of option numbers .1–.3 requires that underlining be performed
using either BS or ESC, –; n. See configuration option 28.1.