Filter
Top Products
Configuration 4–25
Options 31–41 — Control Code Assignments
Discussion
Eleven configuration options are included in this group. When the control
code assigned to a specific configuration option appears in the data stream,
the printer will operate in response to the selection in that configuration
option. For example, if Option 31.0 is selected and ESC ! appears in the data
stream, the printer will switch to Text Dump Mode.
150B/L150B
Option
Number
Display Option 31
Control Code Assignment – 01 Hex
.0 31.0 Escape (ESC or SOH) sequences: ESC ! for T
ext Dump Mode,
ESC P for Mode 1, and ESC R for Mode 2. (default)
.1 31.1 Escape (ESC or SOH) sequences: ESC ! for master print mode,
ESC P for ignored, and ESC R for ignored.
Option 32 *
Control Code Assignment – Cedilla Character Select
.0 32.0
Extended character address 128 produces a space.
.1 32.1 Extended character address 128 produces the Cedilla character
(Default).
* This configuration is available only on printers equipped with
V50.59 DCU, MCU 20.25 (or later) firmware, and primary font
PROM 1
16043–001 or equivalent.
Option 33
Control Code Assignment
.0 33.0 Slash zero disable (default).
.1 33.1
Slash zero enable.
Option 34
Control Code Assignment – Alternate Printronix Plot Control
.0 34.0 Enable ESC Y, even dot centers. (default)
.1 34.1 Ignore ESC Y.
Option 35
Control Code Assignment – Alternate Printronix Plot Control
.0 35.0 Enable ESC Z, odd dot centers (default).
.1 35.1 Ignore ESC Z.