Routine Service and Diagnostics
9–8
Reconnecting the Cables
Perform the following instructions to connect the cables to the printer.
1. Verify that the voltage shown on the printer ID label is within the same
range as the site line voltage, and that the proper power cord has been
selected. (Refer to “Applying Power” on page 2–5.)
2. Make sure the printer power switch is set to OFF (0).
3. Connect the power cord between the printer’s AC power connector and
the AC line receptacle.
4. Connect the interface cable (customer supplied) between the appropriate
printer interface connector and the host computer. (Refer to Chapter 8
for a complete description of connecting the interfaces.)