Filter
Top Products
3–Interactive Commands
Statistics Menu (Command Line Options -gs and -ls)
3-90 SN0054614-00 K
HBA Statistics: Monitoring
(Command Line Option -gs)
13: Statistics 1: HBA Statistics
When you select this option, SANsurfer FC/CNA HBA CLI shows the HBA
Statistics Menu including the following options:
Configuration
Show HBA Statistics
Configuration
13: Statistics 1: HBA Statistics 1: Configuration
To change the adapter statistics:
1. From the Main Menu, type the number for the Statistics option, and then
press
ENTER
.
2. From the Statistics Menu, type the number for the HBA Statistics option,
and then press
ENTER
.
3. From the HBA Statistics Menu, type the number for the Configuration
option, and then press
ENTER
.
The HBA Statistics Settings Menu contains the following options:
Current Settings
Restore Default
Auto Poll
Set Rate
Log to File
4. To see the current port statistics, select Current Settings, and then press
ENTER
. For example:
---------------------------------------
HBA Port Statistics Settings
---------------------------------------
AutoPoll (AP): 10
SetRate (SR): 5
NOTE:
Under Solaris, adapter statistics are disabled if you are using the driver
from the OS installation CDs (QLC driver). Under Linux, this feature is
disabled if you are using the IOCTL or sysfs (inbox) driver.
Under Solaris, link statistics are disabled if you are using the driver from
the OS installation CDs (QLC driver).