Filter
Top Products
3–Interactive Commands
Statistics Menu (Command Line Options -gs and -ls)
SN0054614-00 K 3-91
LogToFile (LF): null.csv
5. To restore the adapter defaults, select Restore Default, and then press
ENTER
. The following message appears:
Resetting to default settings..., done.
6. To change the polling, select Auto Poll, and then press
ENTER
. Then select
either Auto Poll or Manual Poll, and then press
ENTER
to enable that
selection.
7. To change the sampling rate, select Set Rate, and then press
ENTER
. You
are prompted to enter a rate value between 5 and 30 seconds; the current
rate is shown in parentheses. Type a new rate, and then press
ENTER
to
update the sampling rate.
8. To save the adapter statistics to a file, select Log to File, and then press
ENTER
. Type the name of a .csv file to save to, and then press
ENTER
.
Table 3-11 shows the values for the adapter port statistics options.
Current Settings
13: Statistics 1: HBA Statistics 1: Configuration 1: Current Settings
The system shows the current settings for:
AutoPoll (AP)
SetRate (SR)
LogToFile (LF)
Restore Defaults
13: Statistics 1: HBA Statistics 1: Configuration 2: Restore Default
The system restores the default settings and returns a message:
Table 3-11. Adapter Port Statistics Options
Parameter
Name
Alias Value Description
AutoPoll AP 0 Turn on automatic updates of the adapter
port statistics.
1–256 Turn on automatic updates of the adapter
port statistics at a specified interval.
SetRate SR 5–30 Set the polling interval during automatic
update (seconds).
LogToFile LF Log File
Name
Export the statistics to a file (CSV format).