Filter
Top Products
3–Interactive Commands
HBA Parameters Menu
SN0054614-00 K 3-29
Data Rate
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Data Rate
This option shows the Data Rate menu. (Note that data rate configuration is not
available for all adapter port instances.) From this menu you can select:
Auto
1 Gbps
2 Gbps
4 Gbps
8 Gbps
Type the number for the data rate you want, and then press
ENTER
.
Frame Size
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Frame Size
This option shows the Frame Size menu. From it you can select:
Frame Size: 512
Frame Size: 1024
Frame Size: 2048
Type the number for the frame size you want, and then press
ENTER
.
Hard Loop ID
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Hard Loop ID
This option prompts you to enter a valid Hard Loop ID from 0 to 125. Type the
number you want, and then press
ENTER
.
Loop Reset Delay
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Loop Reset Delay
This option prompts you to enter a Reset Delay from 0 to 255 seconds. Type the
number you want for the loop reset delay, and then press
ENTER
.
NOTE:
The 1 Gbps data rate is not supported with 8G adapters.
QLE/QMI81xx adapters support 10Gbps only and cannot be modified.