Filter
Top Products
4–Non-Interactive Commands
Command Summary
SN0054614-00 K 4-45
-s
(Silent Mode)
In non-interactive mode, the system shows result and status messages generated
by SANsurfer FC/CNA HBA CLI (by default) unless suppressed by silent mode.
You can combine this option with the -o option (see ==“-o (Output to a File)” on
page 4-37) so the output is saved in a file and does not appear in the CLI. For
example:
# scli -I all -s -o output.txt
-t
(Display Target Information)
To show the target information for all adapters in the system, type:
# scli -t [ <all> ]
To show the target information for a specific adapter, type:
# scli -t (<hba instance> | <hba wwpn>)
To show specific target information for a specific target on an adapter, type:
# scli -t (<hba instance> | <hba wwpn>) (<target wwpn> |
<target port id>)
Where:
To show the target information on all adapters, type:
-t [<all>]
To show the target information on a specific adapter, type:
-t (<hba instance> | <hba wwpn>)
NOTE:
The -s option is valid only in non-interactive mode.
You can use this option with all non-interactive mode options that have a
corresponding interactive mode option (see Table 4-1). This option must
be the first or last command in the command line.
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
target wwpn = World wide port name of the target
target port id = Port ID of the target