Filter
Top Products
4–Non-Interactive Commands
Command Summary
4-32 SN0054614-00 K
Link Failure—Number of link failures
Loss of sync—Number of sync loss errors
Loss of signal—Number of signal loss errors
Invalid CRC—Number of invalid CRCs
-l
(Display LUN Info)
This command shows LUN information for:
All adapters
A specific target
A specific LUN on a specific target
To show the LUN information for all target devices for a specific adapter Instance,
type:
# scli -l (<hba instance> | <hba wwpn>)
To show the LUN information for a specific device for a specific adapter port, type:
# scli -l (<hba instance> | <hba wwpn>) (<target port id> |
<target wwpn>)
To show the LUN information for a specific LUN on a specific target device for a
specific adapter port instance, type:
# scli -l (<hba instance> | <hba wwpn>) (<target port id> |
<target wwpn>) <lun id>
Where:
-ls
(Display Link Status)
To view the link status, type:
# scli -ls (<hba instance> | <hba wwpn>) [(<param name> |
<param alias>) <param value>]
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
target port id = Port ID of the target
target wwpn = World wide port name of the target
lun id = ID of the LUN