Q-Logic FC0E Network Card User Manual


 
3–Interactive Commands
Statistics Menu (Command Line Options -gs and -ls)
3-94 SN0054614-00 K
“Configuration” on page 3-94
“Show Link Status” on page 3-96
Configuration
13: Statistics 2: Link Status 1: Configuration
When you select the Configuration option, the Link Status Settings Menu
appears and allows you to view and configure the following:
Current Settings
Restore Default
Auto Poll
Set Rate
Log to file
Table 3-12 shows the statistics and link status options.
Current Settings
13: Statistics 2: Link Status 1: Configuration 1: Current Settings
Select the Current Settings option to have the system show the current link
status settings for:
AutoPoll (AP)
SetRate (SR)
LogToFile (LF)
Restore Default
13: Statistics 2: Link Status 1: Configuration 2: Restore Default
The Restore Default option causes the system to restore the default settings and
return the following message:
Table 3-12. Statistics/Link Status Options
Parameter Name Alias Value Description
AutoPoll AP 0 Update the link statistics automati-
cally.
1–256 Update the link statistics up to a speci-
fied interval.
SetRate SR 5–30 Set the Statistics Sampling Rate (sec-
onds).
LogToFile LF Log File Name Export the link statistics to a file (CSV
format).