Q-Logic FC0E Network Card User Manual


 
A–XML Format 1
XML Format 1 Tags for Each Option
SN0054614-00 K A-11
BindbyPortID="value" />
/DriverSettings>
</HBA>
<Status> 0 </Status>
<Reboot> 0 </Reboot>
</QLogic>
Display All Information for One or All Adapters
(Command Line Option -z)
The XML Format 1 for all adapter information is more complicated than its
non-XML counterpart because the tags cannot be repeated. In non-XML mode,
SANsurfer FC/CNA HBA CLI sequentially calls all the options in Table A-1, and
each option is shown in its standard output format. If each option shows its own
XML output, the resulting list would have multiple duplicate tags.
The XML Format 1 for all adapter information is as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.nn.nn Build nn</AppVersion>
Table A-1. Options Shown by -z
Non-
interactive
Option
Description See Section
-g Show system information “General Information Menu (Command
Line Option -g)” on page 3-4
-i Show adapter information “HBA Information Menu (Command Line
Option -i)” on page 3-19
-c Show adapter settings “HBA Parameters Menu” on page 3-24
-t Show device list “Target/LUN List Menu (Command Line
Options -t and -l)” on page 3-36
-l Show LUN list “Target/LUN List Menu (Command Line
Options -t and -l)” on page 3-36
-p Target persistent binding “Target Persistent Bindings Menu (Com-
mand Line Option -p)” on page 3-54
-m Selective LUNs “Selective LUNs Menu (Command Line
Option -m)” on page 3-58
-e Boot device “Boot Device Menu (Command Line Option
-e)” on page 3-60