Filter
Top Products
3–Interactive Commands
Virtual Menu (Command Line Option -vp)
SN0054614-00 K 3-99
In addition, the following notes apply:
The maximum number of virtual adapters that can be created of a physical
adapter is 15.
vPort means virtual port in all the displays.
In command line mode, you must use the WWPN instead of adapter
instance number to select a virtual port.
After you create or delete a virtual adapter, you should refresh the
configuration to see the changes.
List Virtual Port(s)
14: Virtual 1: Virtual Menu 3: List Virtual Ports
When you select this option, the menu of virtual ports on this physical adapter port
appears showing:
List Virtual Ports including for each:
Instance Number
Virtual Port Number
WWPN
Status (Online or Loop Down)
Here is an example:
Virtual Menu
HBA Model QLA2462:
0: vPort 3: WWPN: 21-7B-00-E0-8B-14-5A-CF Online
1: vPort 2: WWPN: 21-67-00-E0-8B-14-5A-CF Online
4: Return to Previous Menu
Delete Virtual Port(s)
14: Virtual 1: Virtual Menu 3: Delete a Virtual Port
To delete a virtual port, select a virtual port number from the Delete a Virtual Port
menu. To see the change, you must manually refresh the virtual port
configuration.
NOTE:
For Solaris 11, this option is not supported for the QLC driver.