Filter
Top Products
4–Non-Interactive Commands
Command Summary
4-44 SN0054614-00 K
You can specify the QoS of the virtual port based on either priority,
bandwidth speed, or bandwidth percentage, where:
You can change the lock and enable properties of the virtual port using the
following options:
-r
(Update HBA Parameters)
To update the adapter parameters, type the following:
# scli -r (<hba instance> | <hba wwpn> | all) <File Name>
Where:
To save the adapter parameters to a file, type:
# scli -r (<hba instance> | <hba wwpn>) save <File Name>
Where:
--pri = Priority to assign to the virtual port
priority = Priority value: low, medium, or high
--bwspd = Bandwidth speed to assign to the virtual port
speed = Value of bandwidth speed
--bwper = Bandwidth percentage to assign to the virtual port
percent = Value of bandwidth percent
--lock = Specify the lock value
lock value = Lock value: 1 for lock or 0 for unlock.
--enable = Specify whether the virtual port is enabled
enable value = Enable value: 1 for enable or 0 for disable
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
all = All adapter ports in the system are updated with the new
adapter parameters
hba parameters file
name
= File name or a path to a file that contains the updated adapter
parameters
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
hba parameters file
name
= File name or a path to a file to save the adapter parameters