Filter
Top Products
D–Help Commands
D-4 SN0054614-00 K
–e ( <hba instance> | <hba wwpn>
<target wwnn> <target wwpn>
<lun id> [ prim | alt1 | alt2 |
alt3]
Configures the operating system to boot
from a specific target:
prim: Primary Boot Port Name
alt1: Alternate 1 Boot Port Name
alt2: Alternate 2 Boot Port Name
alt3: Alternate 3 Boot Port Name
–e ( view | ? ) Shows the current boot device information
on all adapters.
–e ( view | ? ) Shows the current boot device information
on all adapters.
–ei – Lists the exit codes.
–f <file name> Executes from a command input file.
Option –f cannot be combined with any
other options.
-fcoe ( <hba instance> | <hba wwpn> )
--info
Shows current FCoE firmware version.
-fcoe ( <hba instance> | <hba wwpn> )
--getparam --portx
Shows FCoE parameters of specified port.
-fcoe ( <hba instance> | <hba wwpn> )
--setparam --portx ( { <param
name> | <param alias> ) <param
value> }
Modifies FCoE parameters of specified
port.
-fcoe ( <hba instance> | <hba wwpn> )
--loadfw <firmware file>
Updates FCoE firmware.
-fcoe ( <hba instance> | <hba wwpn> )
--mon --nsl --portx
Shows FCoE network interface statistics of
specified port.
-fcoe ( <hba instance> | <hba wwpn> )
--log --list
Shows FCoE available log IDs.
-fcoe ( <hba instance> | <hba wwpn> )
--log --id <logid>
Shows the log specified by the log ID.
–fg ( <hba instance> | <hba wwpn> )
( view | ? )
Shows the current driver settings.
Table D-2. Help Commands (Continued)
Command
Line Action
Arguments Function