Filter
Top Products
SN0054614-00 K D-1
D Help Commands
Table D-2 is an alphabetic listing of the Help commands. Unless otherwise noted,
only one command line option per input file is valid. The hyphen (-) and slash (/)
characters are equivalent. For example, scli -g and scli /g are both valid
commands.
Table D-1 describes each variable used in the command line arguments shown in
Table D-2.
Table D-1. Variables Used in Arguments
Variable Description
<address> IP address.
<hba instance> Adapter instance number of an adapter port.
<hba wwpn> World wide port name of an adapter port.
(xx-xx-xx-xx-xx-xx-xx-xx or xxxxxxxxxxxxxx).
<enable value> Enable value: 1 for enable or 0 for disable.
<file name> Firmware preload table .dat file
<lock value> Lock value: 1 for lock or 0 for unlock.
<log id> FCoE log ID (0–x).
<lun id> Logical unit number of a LUN.
<lun name> Persistent device name assigned to the designated LUN.
<percent> Value of bandwidth percent.
<priority> Priority value: low, medium, or high.
<speed> Link speed.
<target id> ID of a target device.
<target portid> Port ID of a target device. (xx-xx-xx or xxxxxx).
<target wwnn> World wide node name of a target device.
(xx-xx-xx-xx-xx-xx-xx-xx or xxxxxxxxxxxxxx).