Filter
Top Products
4–Non-Interactive Commands
Command Summary
4-38 SN0054614-00 K
Where the file name is systemLUNinfo, all messages are located in the
directory indicated for the system platform:
-p
(Display Persistent Target Binding Info)
With this command you can:
Show binding information for one or on all adapters
Bind a specific target to a selected adapter
Bind all targets on a specific adapter or on all adapter
Unbind a specific target
Unbind all targets on a specific adapter or on all adapters
To show target persistent binding information for a specific adapter port, type:
# scli -p (<hba instance> | <hba wwpn>) (view | ?)
To show persistent binding information for all adapters, type:
# scli -p all (view | ?)
Where:
Windows: syslog.log in the current directory
Linux: /var/log/messages
Macintosh: /var/log/system.log
Solaris: /var/adm/messages
NOTE:
Under Solaris, if you use the driver from the OS installation CDs (QLC
driver), these features are disabled.
Under Linux, if you use the IOCTL or sysfs (inbox) driver these features
are disabled.
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
NOTE:
In Solaris SPARC using a csh or tsch shell, include double quotes around
the question mark (?). For example:
# scli -p <HBA>"?"