Filter
Top Products
SN0054614-00 K B-1
B XML Format 2
This appendix provides the following information:
“Output Parts” on page B-1 explains the output of XML format 2.
“XML Format 2 Tags for Each Option” on page B-3 lists the XML format 2
tags for each option.
Output Parts
The -x2 command line option (see “-x2 (Output in XML Format 2)” on page 4-48)
shows all output in XML Format 2. This section defines the XML2 output format,
which consists of the following parts:
“Main Tag” on page B-1
“Utility Header” on page B-2
“Status Message” on page B-2
“Reboot Message” on page B-2
“Error Message” on page B-2
Main Tag
When SANsurfer FC/CNA HBA CLI is in XML2 mode, all outputs are between the
main tags:
<QLogic>
...
</QLogic>
NOTE:
XML files created using the -x2 command line option match standard
output. They do not match the X1 files (see Appendix A), which are
designed for backward compatibility with customized legacy scripts. If you
are developing new scripts, we strongly recommend using the -x2
command line option, which generates standard output XML files.