Q-Logic FC0E Network Card User Manual


 
3–Interactive Commands
HBA Parameters Menu
3-32 SN0054614-00 K
Commit Changes
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Commit changes
Choose this option to make the changes permanent.
Abort Changes
3: HBA Parameters N: Port Number2: Configure HBA Parameters n: Abort changes
Choose this option to stop without making any changes.
Restore Defaults
3: HBA Parameters n: Port Number 3: Restore Defaults
This option is for 4Gb and 8Gb adapters only. Selecting the Restore Defaults
option causes the following warning to appear:
Warning:
Please update the HBA parameters with extreme care.
Incorrectly updating the HBA parameters may render the HBA
inoperable.
If you currently have boot device information set up in the HBA
parameters, updating the HBA parameters from a file may result in
changing that information.
If you wish to preserve the boot device information, please either
update the file with the correct boot device settings before the
HBA parameters update or re-configure the boot settings after the
update.
Do you want to proceed with the operation?
1: Yes
2: No
If you enter 1 to proceed, the system returns a message similar to the following:
Restoring default settings on HBA instance 5 - QLA2462. Please
wait...
HBA Parameters restore completed. Changes has been saved to HBA
instance 5.
You must reboot in order for the changes to become effective.
CAUTION!
There is undo after you commit to making changes to the adapter
parameters.