Filter
Top Products
D–Help Commands
D-6 SN0054614-00 K
–ls ( <hba instance> | <hba wwpn> )
{ ( <param name> | <param
alias> ) <param value> }
Shows the current link status on an adapter
port.
–m ( <hba instance> | <hba wwpn> )
( view | ? )
Views selective LUN information of all
devices attached to an adapter port.
–m ( <hba instance> | <hba wwpn> )
<target wwnn> <target wwpn>
<lun id> ( view | ? )
Views selective LUN information of a single
device attached to an adapter port.
–m ( <hba instance> | <hba wwpn> )
select | enable <target wwnn>
<target wwpn>
Configures all LUNs of a device attached to
an adapter port (Enable).
–m ( <hba instance> | <hba wwpn> )
select all
Configures all LUNs of all devices attached
to an adapter port (Enable).
–m ( <hba instance> | <hba wwpn> )
unselect | disable <target
wwnn> <target wwpn>
Configures all LUNs of all devices attached
to an adapter port (Disable).
–m ( <hba instance> | <hba wwpn> )
unselect all
Configures all LUNs of all devices attached
to an adapter port (Disable).
–m ( <hba instance> | <hba wwpn>)
{ <target wwnn> <target wwpn>
<lun id> (0 | 1 | enable | |
select | unselect ) }
Configures individual LUN of a device
attached to an adapter port.
–n ( <hba instance> | <hba wwpn> )
{ ( <param name> | <param
alias> ) <param value> }
Modifies the adapter parameters of an
adapter port.
–n ( <hba instance> | <hba wwpn> |
<all> ) <OEM name>
Sets the adapter parameters of an adapter
port with a pre-defined OEM default tem-
plates.
–n ( <hba instance> | <hba wwpn> |
<all> ) default
Restores the adapter parameters of an
adapter port to factory default settings (4Gb
adapters or latest).
–o <file name> Writes the output to a named file. This
option can be combined with other options.
However, this option must be at the begin-
ning or at the end of the command line.
Table D-2. Help Commands (Continued)
Command
Line Action
Arguments Function