Filter
Top Products
Power Supply Setup Page
136
Power Supply Setup Page
The Dominion KX II provides dual power supplies, and can
automatically detect and provide notification regarding the status of
these power supplies. Use the Power Supply Setup page to specify
whether you are using one or both of the power supplies. Proper
configuration ensures that the Dominion KX II sends the appropriate
notifications should a power supply fail. For example, if power supply
number one fails, the power LED at the front of the unit will turn red.
¾
To enable automatic detection for the power supplies
in use:
1. Select Device Settings > Power Supply Setup. The Power Supply
Setup page opens:
Figure 59: Power Supply Setup
2. If you are plugging power input into power supply number one
(left-most power supply at the back of the unit), then check the
Powerln1 Auto Detect option.
3. If you are plugging power input into power supply number two
(right-most power supply at the back of the unit), then check the
Powerln2 Auto Detect option.
4. Click OK.