Filter
Top Products
Appendix A: Specifications
195
• SNMP Default UDP Ports (optional) - Port 161 is used for
inbound/outbound read/write SNMP access and port 162 is used for
outbound traffic for SNMP traps.
• UDP Port 21 - Port 21 is used for the Dominion KX II command line
interface (when you are working with Raritan Technical Support).
Target Server Connection Distance and Video Resolution
The maximum supported distance is a function of many factors
including the type/quality of Cat 5 cable, server type and manufacturer,
video driver and monitor, environmental conditions, and user
expectations. The following table summarizes the maximum target
server distance for various video resolutions and refresh rates:
Video Resolution Refresh Rate
Maximum
Distance
1600x1200
60 50 ft (15 m)
1280x1024 60 100 ft (30 m)
1024x768 60 150 ft (45 m)
The use of Paragon CIMs will not increase the distance between the
Dominion KX II and the target server.
Due to the multiplicity of server manufacturers and types, OS versions, video
drivers, etc. and the subjective nature of video quality, Raritan cannot guarantee
performance across all distances in all environments.
Refer to the Supported Video Resolutions for the video resolutions
supported by Dominion KX II.
Network Speed Settings