Filter
Top Products
Power Controlling a Target Server
62
Power Controlling a Target Server
Note: These features are available only when you have made power associations.
Refer to power control for more information.
Power Cycle a Target Server
¾
To power cycle a target server:
1. From the KX II Remote Console, click the Port Access tab to open it.
The Port Access page opens.
2. Click the Port Name of the appropriate target server. The Port Action
Menu is displayed.
Figure 22: Port Action Menu (power options)
3. Select Power Cycle. A message is displayed confirming the action
taken.
Power On a Target Server
¾
To power ON a target server:
1. From the KX II Remote Console, click the Port Access tab to open it.
The Port Access page opens.
2. Click the Port Name of the appropriate target server. The Port Action
Menu is displayed.
3. Select Power On.