Filter
Top Products
Firmware Upgrade
164
6. Click Upload from the Firmware Upgrade page. Information about
the upgrade and version numbers is displayed for your confirmation
(if you opted to review CIM information, that information is
displayed as well):
Figure 76: Firmware Upgrade Review
Note: At this point, connected users are logged out, and new login
attempts are blocked.
7. Click Upgrade. Please wait for the upgrade to complete. Status
information and progress bars are displayed during the upgrade.
Upon completion of the upgrade, the unit reboots (1 beep sounds to
signal the reboot).
Figure 77: Firmware Upgrade Successful
8. As prompted, close the browser and wait approximately 5 minutes
before logging in to the Dominion KX II again.