Filter
Top Products
3. Start.
❐ Your fax message is stored and held on polling standby.
NOTE: If you see " ", you already have a message on Free
Polling Standby.
❐ To clear the old message: Clear the old polling transmission file
using function 23 (see page 104). Then start from the step 1
again.
Secured Polling
1. Place your document in the feeder.
2. Function 1 4 and Yes.
NOTE:
If you have not yet stored an ID Code using Function 61, you will be asked to
enter an ID Code. Proceed in the same way as for step 4 in "Stored ID
Override" on the next page.
3. Start.
❐ Your fax message is stored and held on polling standby.
NOTE: If you see " " you already have a message on Se-
cured Polling Standby.
❐ To erase the old message: Clear the old polling transmission file
using function 23 (see page 104).
❐ To keep the old message: Input an ID code in the same way as
for step 3 in "Stored ID Override" below.
Stored ID Override
This procedure will override the ID Code stored in your machine. The override is
only effective for this one transmission.
1. Place your document in the feeder.
2. Function 1 4 and Yes.
3. Press until the screen is as shown
opposite.
ADVANCED
FEATURES
ADVANCED FEATURES OTHER
99