Filter
Top Products
7. Either:
❐ If you do not have an optional feature
expander, go to step 8.
❐ Edit the Confidential ID stored with
this code; press Yes then input the
ID.
When the ID is correct, press Yes.
8. Either:
❐ Enter or edit another code: Go to step 2.
❐ Finish: Function.
Switching Restricted Access On
Restricted Access allows you to keep a closer track of machine usage, and deters
passers-by from casually using your machine.
If this feature is switched on, users have to enter their Personal Code before they
can use the machine. The Personal Code must have already been stored in the
machine.
However, the user can enter codes directly at the key pad. Therefore, if you are
serious about using this feature to stop casual users from operating the machine,
you must allocate relatively obscure codes to all authorized users, and try to avoid
obvious numbers such as 0001.
To switch Restricted Access on or off, do the following:
If you wish to switch Restricted Access on or off, do the following procedure. (See
page 168 if you need more information about the User Parameter settings
adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
2. Yes.
3. The settings for switch 00 are now shown
on the bottom line of the display.
Digit 4 (Double underlined)
4. Press until the settings for switch 05 are
shown.
The setting that you need to change is
digit 4.
Digit Purpose
4 Restricted Access 0: Off 1: On
ADVANCED
FEATURES
ADVANCED FEATURES TRANSMISSION
61