Filter
Top Products
Transmission Mode Home Position Adjustment
The default mode of your machine is Memory Transmission. If you wish, you can
change this home position to Immediate Transmission.
The procedure is as follows (see page 11 if you need more information about the
User Parameter settings adjustment procedure).
1. Function 6 2 2 2 2 6 3 and Yes.
At this time, you can print a User
Parameter List if you press and Start.
2. Press Yes.The settings for switch 00 are
now shown on the bottom line of the dis-
play.
The setting that you need to change is
that for digit 6.
3. If you wish to change the setting, press 6
on the ten key pad.
SWITCH 00 :0000 0000
Digit 6:(Double underlined)
0: Memory Transmission
1: Immediate Transmission
4. Finish: Yes and Function
SENDING A FAX MESSAGE ROUTINE OPERATION
78