Filter
Top Products
5. If you wish to change the setting press 0.
6. Finish: Yes and Function.
Cross-reference
Personal Codes: see page 56.
If you wish, you can prevent unidentified senders from sending you confidential messages.
See page 76.
Locking Incoming Messages (Memory Lock)
Overview
If Memory Lock is switched on, the machine will not print any incoming fax
messages. They will be kept in memory until you enter the Memory Lock ID that
you previously stored in the machine. Messages received by Confidential
Reception will not be printed when you input the Memory Lock ID.
To use Memory Lock, you must first:
❐ Store a Memory Lock ID. (Function 61)
❐ Switch Memory Lock on. (Function 62)
To make Memory Lock more versatile you may choose to receive messages from
select locations into memory or execlude certain select locations from coming into
memory. You may:
❐ Specify the senders whose messages you want to be lock in memory (Special
Terminal). Do this by programming the RTI’s or CSI’s of these senders
(Function 81)
❐ Select the messages to store in memory (Function 63):
a) Only messages from Special Terminals.
b) All messages except those from Special Terminals.
Cross-reference Confidential Reception: see page 69.
RECEPTION ADVANCED FEATURES
72