Filter
Top Products
LOCATION
For the best possible performance, install your machine in a place which satisfies
the following conditions.
Not exposed to direct sunlight
Well ventilated (air turnover at least three times per hour); to avoid the build-up
of ozone, make sure to locate the machine in a large well-ventilated room
which has an air turnover of more than 30 yd
3
/hr per person.
Level
Not subject to vibration
Away from other electronic equipment, to avoid interference
Away from areas containing corrosive gas
Dust-free
Condensation-free
Temperature 63 to 82°F
Humidity 40 to 70% RH (do not install near a humidifier)
Away from heaters and air conditioners, to avoid sudden changes of
temperature
Within 5 yards of a three-pin grounded
power outlet (115 Volts, 60 Hz)
With the clearance as shown on the right
NOTE: This machine generates a certain
amount of ozone. Although the
amount generated is within safety
requirements, it is recommended
that, to avoid ozone buildup, you
install the machine in a room which
is properly ventilated.
INSTALLING THE MACHINE
4"
4"
4"
28"
24