Filter
Top Products
10. Yes.
If " " appears,
either;
❐ Keep the number: No.
❐ Erase the number : Yes.
NOTE: Do not store more than 132 numbers in a Group.
11. Either:
❐ Input another number: Go to step 9.
❐ Finish storing numbers in this group:
No. And go to step 12.
12. Now you can either:
❐ Start working on another Group.
Go to step 2.
❐ Return to standby mode by pressing
Function.
Editing and Erasing the Group
This procedure deletes or edits this Group and all the numbers stored in it. The
Speed Dial Codes and Quick Dial keys that you used in this Group will not be
deleted from the memory; you can continue to use them for other purposes.
1. Function 3 3 and Yes.
2. Input the number of the group that you
wish to alter.
Example: If you want to delete or edit
the contents of the Group 1; press 1 on
the ten keypad. And press Yes.
3. Either:
❐ If you want to change the Quick
Dial key where that Group is
stored: Yes.
Then press No and press a new
Quick Dial key. (NOTE: If that
Group is not programmed into a
Quick Dial key, you don’t have to
do it.)
Then press Yes and go to step 4.
❐ If you don’t want to program that
group into a Quick Dial key, press
No, then go to step 4.
APPENDIX A
INITIAL SETTINGS APPENDIX A
186