Filter
Top Products
REPLACING PAPER
❐ When the Add Paper indicator ( ) on the operation panel is lit, the
cassette is empty.
To refill the main cassette:
1. Slide the cassette all the way out, and
place it on a large flat surface.
CAUTION
To avoid dropping the cassette, hold it
by the front and side while pulling it
out.
2. Bend the new stack of paper a few
times.
3. Place the paper into the tray in the
direction shown opposite, making
sure it fits under the metal corners at
the front.
If there is space between the paper
and a fences, the paper will not be
fed properly. To avoid this, carefully
move in each fence until it is flush
with the paper.
NOTE: If you have the optional cas-
sette and change the paper
size, adjust both side fences
to the size of the paper.
Then set the appropriate size
plate at the front of the optional
cassette.
(See page 169.)
NOTE: ❐ Make sure that the paper fits
the corners.
❐ Do not fill up the cassette past
the load limit marker.
4. Replace the cassette carefully.
LOOKING AFTER THE MACHINE
Load Limit
126