Filter
Top Products
Specified Cassette Selection (Optional Lower Cassette Required)
Overview
This feature is only available if your machine has the Lower Cassette. Using this
feature, you can select fax messages from certain senders to be printed from a
specified cassette.
Example:
Put yellow paper in the specified cassette. Then, messages from the head office
can be printed out on yellow paper; this will make it easy for you to see when a
message from head office has arrived.
To direct messages from a particular sender to a special cassette:
❐ Specify the senders you want to print from the specified cassette (Function
62). Do by this by programming the RTI’s or CSI’s as Special Terminals. (Ask
the sending party what their RTI/CSI is. Or make a communication with that
terminal, print a JOURNAL, and read off the RTI/CSI.)
If the other party is using a machine made by another maker, they may not be
familiar with the terms RTI or CSI. Explain that you are interested in the
telephone number that they stored in the machine for identification purposes.
❐ Switch Specified Cassette Selection on. (Function 62)
❐ Select the specified cassette. (Function 38; Printer Interface Required)
❐ Select which messages to print using paper from the specfied cassette:
a) Only messages from special terminals.
b) All messages except those from Special Terminals.
Note: If one of the senders changes their RTI/CSI, you have to change the
stored RTI/CSI also. Otherwise, messages from that sender will no longer
be sent to the required cassette.
Cross-references:
Journal: see page 137.
RTI and CSI: see page 205. Wild Cards: see page 102.
Note: ❐ Messages from senders that have RTI/CSIs that match those that
were input using the above procedure will be printed using the
specified paper cassette.
❐ First of all, you must programming Special Terminals for cassette se-
lection. (Function 81)
ADVANCED
FEATURES
ADVANCED FEATURES RECEPTION
99