Filter
Top Products
RTI (Remote Terminal Identification)
Your RTI appears on the other party’s operation panel during communication, if
the other machine was made by the same manufacturer as yours. The RTI can
have up to 20 characters (numbers and letters can be used, along with some
punctuation marks). Program something easy to recognize, such as your name,
company name, or department name within the company.
1. Press Function 6 2 2 2 2 6 1 and Yes.
2. Press until the screen is as shown
opposite.
3. Press Yes.
4. Input the RTI using the Quick Dial key or
the ten key pad. (You can delete the
character using Clear.)
Example: XYZ COMPANY
How to program characters, see page 182.
Note: RTI cannot be not more than 20 characters.
5. Press Yes to program the RTI. You may then enter the TTI. Go to the step 1 in
the following procedure in order to enter the TTI.
TTI (Transmit Terminal Identification)
Your TTI is printed at the other end on the top edge of each page that you send.
The TTI can have up to 32 characters (numbers and letters can be used, along
with some punctuation marks). Program something easy to recognize, such as
your name, company name, or department name within the company.
1. Either:
SOME ITEMS MUST BE PROGRAMMED FIRST APPENDIX
206