Filter
Top Products
ERRATA AND ADDITIONAL INFORMATION
[P88] Additional Information: Specified Cassette Selection
— Specified cassette selection only allows printing from the Optional Lower
Cassette. Printing from the Optional Removable Cassette (as stated in the title) is
not available.
— You do not need to select the specified cassette using Function 37.
[P88] Additional Information: Printing received fax messages using specified
cassette selection.
❐ Use function 62 to switch specified cassette selection on/off.
❐ Use function 63 to switch specified cassette selection on/off and decide
how to treat the specified senders.
❐ Use function 81 to program the specified senders’ indentification. If you
wish to treat each sender differently, use this function.
[P169] Errata:
Only the optional paper feed cassette is required for specified cassette selection
— not the optional feature expander as stated.
[P172] Additional Information:
Switch 07
Digit 5 Digit 4 Setting
X0Off
01
Messages from senders whose RTI/CSI are programmed are printed
from a upper cassette.
11
Messages from senders whose RTI/CSI are not programmed are printed
from a upper cassette.
[Pages 132,181] - Additional information
When you set paper in the cassette, please note the following:
1. Set the paper into the cassette.
2. If there is space
between the two side fences
and the paper, push the
fences flush to the paper.
Side fence
End fence
Side fence
[Main Cassette]
[Optional Paper Feed Cassette]
8
1
2
11
11
End fence