Filter
Top Products
❐ To edit RTI’s/CSI’s allocated to this
number: press until the RTI/CSI
you wish to edit appears. Then
press Yes. Go to step 6.
6. Either:
❐ Edit the RTI/CSI and press Yes.
Then go to step 7.
❐ To delete the RTI/CSI: No and Yes.
Then go to step 5.
Caution: If you delete all the RTI’s and CSI’s for a forwarding station, you
must also delete the forwarding station (see step 3). If you do not
do this, all incoming messages will be forwarded to that station.
7. To store it as a wild card: Yes.
Otherwise: No.
8. Either:
❐ Edit or input another RTI/CSI for this
forwarding station: Press Yes and
Go to step 3.
❐ To work on another forwarding sta-
tion: press No. Go to step 2.
❐ Finish: Function.
NOTE: If you switch the forwarding on and program no RTI’s/CSI’s, all
incoming messages are forwarded.
Switching Forwarding On/Off
Before you use Forwarding, you have to switch it on using Function 62. If it is
switched off, the machine will not forward any incoming fax messages.
After you switch Forwading on, is displayed on the operation panel
when the machine is in standby mode.
NOTE: Forwarding cannot be switched on if Memory Lock is switched on. If you
wish to use Forwarding, you must switch Memory Lock off.
1. Function 6 2 2 2 2 6 2 and Yes.
2. Scroll through the list of features with
until the screen is as shown as opposite.
3. Yes.
ADVANCED
FEATURES
ADVANCED FEATURES RECEPTION
85