Filter
Top Products
INSTALLING THE PHOTOCONDUCTOR, TONER CASSETTE
AND CLEANING PAD
Before using the machine, install the photoconductor, toner cassette and
cleaning pad the as in the following procedure
1. Lift up the operation panel.
2. Open the front cover. (Push the button on
the cover.)
3. Place the photoconductor in the machine.
Pay attention to the green knob. One of
them is marked "R" for right side.
4. Remove the black sheet as shown in the
lower picture.
5. Turn the green levers to lock the photo-
conductor in place.
CAUTION:
Never touch the surface of the
photoconductor (green drum).
R
I
NSTALLING THE
MACHINE
APPENDIX INSTALLING THE PHOTOCONDUCTOR, TONER CASSETTE AND CLEANING PAD
193