4. Yes.
5. Enter the ID code that you wish to use for
this message.
Example: 2 5 6 7 from the ten keypad.
NOTE: If you see " "
you already have a message on
Secured Polling standby.
❐ To erase the old message:
Clear the old polling file by
Function 23 (see page 104).
❐ To keep the old message,
repeat the procedure from
step 3.
6. Yes.
7. Start.
❐ Your fax message is stored and held on polling standby.
NOTE: If you need to cancel a polling transmission operation, use Function 23
(see page 104).
OTHER ADVANCED FEATURES
100