Filter
Top Products
26
1600XP Series Installation and Operation Manual
14. Touchscreen Menu Tree
14.1 Front Panel Layout
The diagram below shows the menu tree for the touchscreen display. The four folder tabs and their
associated sub-menu choices are shown on the left, and a description of the displays /choices are detailed
on the right.
MAIN – Displays the starting
screen. It has a RUN and STOP
key that place the UPS in In-Line or
Bypass mode respectively.
MONITOR – Graphically displays
the current status of the UPS (On-
Line, Backup, Bypass, Shutdown)
in an interactive power ow block
diagram. Selecting one of the
blocks provides additional detailed
data of the Input (IN), Output (OUT),
Bypass (BYP), Battery (BAT), and
DC Bus (DC), Control & Congura-
tion (C&C), and Display & External
(D&E) devices.
SETTINGS – Allows monitoring
and/or modication of UPS pa-
rameters. Parameters that can be
viewed or modied vary depending
on the security level of the login
password entered using keypad.
Records – Displays the most re-
cent 32 Test, Backup, Faults,
Warning, Operation, and System
change records.
System records are only available
at the distributor and depot security
levels.
In any record set, if more than 32
incidences have occurred, only the
most recent 32 record are retained
in each report.
Tab: Main ID / RUN-STOP
Tab: Settings
Settings Menu
Disp/Reye
Ctrl/Cfg
DC Bus
Output
ID Input
History
Batt
Bypass
Tab: Records
Records Menu
Warnings
Backup
System
Operation
Faults
Test
Tab: Monitor
Monitor Menu
BYP
OUT
DC
IN BAT
D&R
C&C