Toshiba B-850 Printer User Manual


 
2. SYSTEM MODE EO13-33003
2.1 Self-diagnostic Test
2- 8
Item # Description Specification
ACK/BUSY (32) Centronics interface ACK/BUSY timing setting TYPE1: A rise of ACK signal and a release
of BUSY occur at the same time.
TYPE2: A fall of ACK signal and a release
of BUSY occur at the same time.
WEB PRINTER (33) Web printer function ON: Available
OFF: Unavailable
INPUT PRIME (34) Input prime selection
(Reset operation when INIT signal is ON)
ON: Available
OFF: Unavailable
EX. I/O MODE (35) Expansion I/O interface operating mode TYPE1: Standard mode
TYPE2: Inline mode
PLUG&PLAY (36) Plug & Play setting ON: Available
OFF: Unavailable
LBL/RBN END (37) Print processing setting at the label/ribbon error detection TYPE1: Printing is paused in the middle of
printing.
TYPE2: Printing is paused after the label is
issued.
MAXI CODE SPEC. (38) MAXI code specification selection TYPE1: Compatible with the current
version
TYPE2: Special specification
AUTO CALIB. (39) Automatic calibration OFF: Disabled
ON TRANS: Enabled with the transmissive
sensor
ON REFLECT: Enabled with the lower
reflective sensor
LAN (40) Enabling or disabling the LAN ON SNMP ON: LAN and SNMP are
enabled.
ON SNMP OFF: LAN is enabled, but
SNMP is disabled.
OFF: LAN is disabled.
PRTR IP ADDRESS (41) Printer IP address ***.***.***.***
GATE IP ADDRESS (42) Gateway IP address ***.***.***.***
SUBNET MASK (43) Subnet mask ***.***.***.***
MAC ADDRESS (44) MAC (Media Access Control) address for LAN controller
on the MAIN PC Board
¶¶-¶¶-¶¶-¶¶-¶¶-¶¶
TTF AREA (45) True type font registration area size 0 KB to 3072 KB (unit of 128 KB)
EXT CHR AREA (46) External character registration area size 0 KB to 3072 KB (unit of 128 KB)
BASIC AREA (47) BASIC file store area size 0 KB to 1792 KB (unit of 128 KB)
PC SAVE (48) PC saving area size 0 KB to 3072 KB (unit of 128 KB)
SOCKET PORT (49) Socket port number ON: Available
OFF: Unavailable
Port No. 0 to 65535
BASIC (50) BASIC interpreter setting ON: Available
OFF: Unavailable
BASIC TRACE (51) BASIC interpreter trace setting ON: Available
OFF: Unavailable
DHCP (52) DHCP function setting ON: Available
OFF: Unavailable
DHCP ID (53) DHCP ID setting Max. 16 characters
DHCP HOST NAME (54) DHCP host name Max. 16 characters
RTC BATT. CHK (55) RTC Low Battery Check setting ON: Available
OFF: Unavailable
RTC RENEWAL (56) RTC data renewal timing BATCH: per batch
PAGE: per page