Filter
Top Products
2. SYSTEM MODE EO13-33003
2.3 Printer Parameter Fine Adjustment
2-30
2.3.1 Feed Amount Fine Adjustment
This parameter is to fine adjust a feed amount after printing (= to fine adjust the next media’s print start
position).
When “<3>ADJUST SET” appears, press the [PAUSE] key.
Use the [FEED] or [RESTART] key to select a desired option. (Range: -50.0 mm to +50.0 mm)
[FEED] key: Pressing the [FEED] key one time causes a –0.1 mm change, up to –50.0 mm.
[RESTART] key: Pressing the [RESTART] key one time causes a +0.1 mm change, up to +50.0 mm.
After completing the fine adjustment, press the [PAUSE] key.
• Example of Feed Amount Fine Adjustment
When setting +3.0 mm
Compared with “+0.0mm” position,
the print start position is shifted
forward.
When setting +0.0 mm
When setting –3.0 mm
Compared with “+0.0mm” position,
the print start position is shifted
backward.
NOTE: The fine adjustment value equals to the sum of the fine adjustment values set by the PC command and
this parameter.
The maximum feed length fine adjustment value is ±50.0 mm. When the value reached the maximum,
the value remains unchanged even if the subsequent fine adjustment is performed.
FEED ADJ.+10.0mm
[RESTART]
[FEED]
FEED ADJ.+50.0mm
FEED ADJ.+49.9mm
FEED ADJ.+0.0mm
FEED ADJ.-49.9mm
FEED ADJ.-50.0mm
FEED ADJ.+0.1mm
FEED ADJ.-0.1mm
One label
Print Start Position
Print Start Position
3
mm
3mm
Feed Direction
Feed Direction
Print Start Position
One label
Feed Direction
One label