Filter
Top Products
2. SYSTEM MODE EO13-33003
2.2 Parameter Setting
2-22
2.2.11 FEED Key Function Selection
This parameter is to choose the function of the [FEED] key.
When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
After selecting the FEED key function, press the [PAUSE] key.
2.2.12 KANJI Code Selection
This parameter is to choose a KANJI code.
When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
NOTE: Kanji code selection is not supported by the QQ/QP model as the Kanji ROMs are not installed.
After selecting a Kanji code, press the [PAUSE] key.
2.2.13 EURO Code Selection
This parameter is to choose a Euro code (€).
When “<2>PARAMETER SET” appears, press the [PAUSE] key until the following display appears.
Use the [FEED] or [RESTART] key to select a desired option.
NOTE: Pressing the [FEED] or [RESTART] key causes 1 byte change in the Euro Code value.
After selecting a Euro code, press the [PAUSE] key.
[RESTART]
[FEED]
EURO CODE B0
EURO CODE 20
EURO CODE 21
EURO CODE FE
EURO CODE FF
FEED KEY FEED
FEED KEY PRINT
FEED KEY FEED
[RESTART]
[FEED]
KANJI CODE TYPE1
KANJI CODE TYPE1
KANJI CODE TYPE2
[RESTART]
[FEED]
Windows code
Original code
The [FEED] key will feed one media when pressed.
The [FEED] key will print the data in the Image Buffer
(The last printed data)