Filter
Top Products
2. SYSTEM MODE EO13-33003
2.5 Sensor Adjustment
2-49
2.5 Sensor Adjustment
Outline of the Sensor Adjustment
In the Sensor Adjustment mode, the status of the sensors and thermistors is displayed. Also you can store
media level voltage and media end level voltage for the Black Mark, Feed Gap, and Ribbon End Sensors.
The Sensor Adjustment menu contains the following:
[PAUSE]
[H]28°C [A]28°C
[REF.<U>] 3.5V
[REF.<U>] 4.8V*
[TRANS.] 2.4V
[TRANS.] 4.1V*
<5>SENSOR ADJ.
[PAUSE]
[FEED] or [RESTART]
[PAUSE]
[FEED] or [RESTART]
[PAUSE]
Thermistor Status Display:
Temperatures being detected by the Print Head Thermistor and the
Ambient Thermistor are displayed.
Upper Black Mark Sensor Adjustment:
Using the media actually used, a “media level” voltage is stored.
Feed Gap Sensor Adjustment:
Using the media actually used, a “media level” voltage is stored.
Upper Black Mark Sensor Status Display:
Voltage being detected by the Upper Black Mark Sensor is displayed.
Feed Gap Sensor Status Display:
Voltage being detected by the Feed Gap Sensor is displayed.
[REF.<L>] 3.5V
[REF.<L>] 4.8V*
[FEED] or [RESTART]
[PAUSE]
Lower Black Mark Sensor Adjustment:
Using the media actually used, a “media level” voltage is stored.
Lower Black Mark Sensor Status Display:
Voltage being detected by the Lower Black Mark Sensor is displayed.
[PE REF<U>] 0.7V
[PE REF<U>] 0.7V*
[PE TRANS.] 4.3V
[PE TRANS.] 4.3V*
[FEED] or [RESTART]
[PAUSE]
[FEED] or [RESTART]
[PAUSE]
Upper Black Mark Sensor Adjustment (No media):
“No media level” voltage is stored.
Feed Gap Sensor Adjustment (No media):
“No media level” voltage is stored.
Upper Black Mark Sensor Status Display (No media):
“No media level” voltage detected by the Upper Black Mark Sensor is displayed.
Feed Gap Sensor Status Display (No media):
“No media level” voltage detected by the Feed Gap Sensor is displayed.
[PE REF<L>] 0.9V
[PE REF<L>] 0.9V*
[FEED] or [RESTART]
[PAUSE]
Lower Black Mark Sensor Adjustment (No media):
“No media level” voltage is stored.
Lower Black Mark Sensor Status Display (No media):
“No media level” voltage detected by the Lower Black Mark Sensor is displayed.