Filter
Top Products
2. SYSTEM MODE EO13-33003
2.5 Sensor Adjustment
2-52
2.5.5 Upper Black Mark Sensor Adjustment (Paper End Level)
Follow the procedure below to store a paper end level voltage of the Upper Black Mark Sensor.
(1) Remove any paper from the detecting area of the Upper Black Mark Sensor.
(2) Press and hold the [RESTART] or [FEED] key for more than 3 seconds.
(3) Press the [PAUSE] key to show a paper end status of the Lower Black Mark Sensor.
2.5.6 Lower Black Mark Sensor Adjustment (Paper End Level)
Follow the procedure below to store a paper end level voltage of the Lower Black Mark Sensor.
(1) Remove any paper from the detecting area of the Lower Black Mark Sensor.
(2) Press and hold the [RESTART] or [FEED] key for more than 3 seconds.
(3) Press the [PAUSE] key to show a paper end status of the Feed Gap Sensor.
2.5.7 Feed Gap Sensor Adjustment (Paper End Level)
Follow the procedure below to store a paper end level voltage of the Feed Gap Sensor.
(1) Remove any paper from the detecting area of the Feed Gap Sensor.
(2) Press and hold the [RESTART] or [FEED] key for more than 3 seconds.
(3) Press the [PAUSE] key to return to “<5>SENSOR ADJ.” display.
[PE REF<U>] 0.7V*
When storing a paper end level voltage is completed, “*” appears.
[PE REF<U>] 0.7V
Real-time status detected by the Upper Black Mark Sensor (Paper end level)
[PE REF<L>] 0.9V*
When storing a paper end level voltage is completed, “*” appears.
[PE REF<L>] 0.9V
Real-time status detected by the Lower Black Mark Sensor (Paper end level)
[PE TRANS.] 4.3V*
When storing a paper end level voltage is completed, “*” appears.
[PE TRANS.] 4.3V
Real-time status detected by the Feed Gap Sensor (Paper end level)