Filter
Top Products
2. SYSTEM MODE EO13-33003
2.2 Parameter Setting
2-15
2.2 Parameter Setting
Outline of Parameter Setting
In the Parameter Setting mode, various kinds of parameters, such as communication, key, LCD, etc. can be set.
This will allow a use of the printer to comply with your operating conditions.
The Parameter Setting menu contains the following:
NOTE: Baud rate, Data length, Parity, and Transmission control code should be set to the same values as those of the host
computer. Failure to do this causes improper operation.
Character code selection
Character zero selection
Baud rate selection
Data length selection
Stop bit length selection
Parity selection
Flow control code selection
LCD language selection
A
uto forward wait selection
[PAUSE]
FONT CODE PC-850
ZERO FONT 0
SPEED 9600bps
DATA LENG. 8bits
STOP BIT 1bit
PARITY EVEN
XON+READY AUTO
LCD ENGLISH
FORWARD WAIT OFF
<2>PARAMETER SET
EURO CODE B0
A
UTO HD CHK OFF
A
CK/BUSY TYPE1
WEB PRINTER OFF
EX.I/O TYPE1
PLUG & PLAY OFF
LBL/RBN END TYP1
Euro code selection
A
uto print head check
selection
Centronics ACK/BUSY timing
selection
Web printer function selection
Expansion I/O interface type
selection
Plug & Play selection
Label end/Ribbon error
selection
MAXI CODE TYPE1
Maxi code specification
selection
Control code selection
CODE ESC,LF,NUL
FEED KEY FEED
F
ee
d
k
ey
f
unct
i
on se
l
ect
i
on
KANJI CODE TYPE1
Kanji code selection
INPUT PRIME OFF
Input prime selection
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]