Filter
Top Products
2. SYSTEM MODE EO13-33003
2.5 Sensor Adjustment
2-51
2.5.3 Lower Black Mark Sensor Adjustment
Follow the procedure below to store a media level voltage of the lower black mark sensor.
(1) Load a tag stock in the printer so that the Lower Black Mark Sensor detects a print area (no black
mark).
(2) Press and hold the [RESTART] or [FEED] key for more than 3 seconds.
(3) Remove the tag stock from the printer.
(4) Press the [PAUSE] key to show a real-time feed gap sensor status.
2.5.4 Feed Gap Sensor Adjustment
Follow the procedure below to store a backing paper level voltage of the Feed Gap Sensor.
(1) Place the backing paper (labels are removed) in the printer so that the Feed Gap Sensor detects it.
(2) Press and hold the [RESTART] or [FEED] key for more than 3 seconds.
(3) Remove the backing paper from the printer.
(4) Press the [PAUSE] key to show a paper end status of the Upper Black Mark Sensor.
[TRANS.] 2.4V
Real-time status detected by the Feed Gap Sensor
0.0V to 5.0V
[TRANS.] 4.1V*
When storing a backing paper level voltage is completed, “*” appears.
[REF.<U>] 4.8V*
When storing a media level voltage is completed, “*” appears.
[REF.<L>] 3.8V
Real-time status detected by the Lower Black Mark Sensor
0.0V to 5.0V