Filter
Top Products
2. SYSTEM MODE EO13-33003
2.3 Printer Parameter Fine Adjustment
2-28
2.3 Printer Parameter Fine Adjustment
Outline of Printer Parameter Fine Adjustment
In the Printer Parameter Fine Adjustment mode, you can fine adjust each parameter, such as Print tone,
Print start position, Threshold, etc. which are set by the PC command. This is useful when using several
types of media by turns or when the print start position or cut position (or stop position of the strip issue) is
required to be fine adjusted.
The Printer Parameter Fine Adjustment menu contains the following.
Feed Amount Fine Adjustment
Cut position (or stop position of the strip issue) Fine Adjustment
Reverse Feed Amount Fine Adjustment
X Coordinate Fine Adjustment
Print Tone Fine Adjustment (Thermal Transfer)
Print Tone Fine Adjustment (Thermal Direct)
Ribbon Motor Drive Voltage Fine Adjustment (Take-up Motor)
Ribbon Motor Drive Voltage Fine Adjustment (Feed Motor)
Threshold Fine Adjustment (Lower Black Mark Sensor)
Threshold Fine Adjustment (Feed Gap Sensor)
[
PAUSE
]
FEED ADJ.+10.0mm
CUT ADJ. +10.0mm
BACK ADJ. +5.0mm
X ADJUST +50.0mm
TONE ADJ.<T> +3
TONE ADJ.<D> -2
RBN ADJ <FW> -10
RBN ADJ <BK> -5
THRESHOLD<R>1.0V
THRESHOLD<T>1.4V
<3>ADJUST SET
[
PAUSE
]
[
PAUSE
]
[
PAUSE
]
[
PAUSE
]
[
PAUSE
]
[
PAUSE
]
[
PAUSE
]
[
PAUSE
]
[
PAUSE
]
[
PAUSE
]