Filter
Top Products
3. ON LINE MODE EO13-33003
3. ON LINE MODE
3- 3
LED Indication
No. LCD Message
POWER
ON
LINE
ERROR
Printer Status
Restoration
by
RESTART
key Yes/No
Acceptance of
Status Reques
t
Reset
Command
Yes/No
19 SYSTEM ERROR z
When the following abnormal operations
are performed, a system error occurs:
(a) Command fetch from an odd
address
(b) Access to word data at an odd
address
(c) Access to long-word data at an odd
address
(d) Access to the area of 80000000H to
FFFFFFFFH in the logic space in
user mode.
(e) An undefined instruction in an area
other than a delay slot was decoded.
(f) An undefined instruction in a delay
slot was decoded.
(g) An instruction to rewrite a delay slot
was decoded.
No No
20 LAN INITIAL... z z 100 Base LAN Board is being initialized. ----- -----
21 DHCP INITIAL… z z
The DHCP client is being initialized.
*When the DHCP function is enabled.
----- -----
22 LOW BATTERY z
The voltage of the Real Time Clock
Battery is 1.9V or less.
No Yes
23
Display of error
message (See Notes.)
z
A command error has occurred in
analyzing the command.
Yes Yes
NOTE: Description of Command Error
• If a command error is found in a command received, 16 bytes of the command error, starting from the command
code, will be displayed. (However, [LF] and [NUL] will not be displayed.)
Example 1 Example 2
[ESC] T20 G
30 [LF] [NUL] [ESC] XR; 0200, 0300, 0450, 1200, 1, [LF] [NUL]
Command error Command error
The following message appears. The following message appears.
Example 3
[ESC] PC001; 0A
00, 0300, 2, 2, A, 00, B [LF] [NUL]
Command error
The following message appears.
• When the error command is shown, “? (3FH)” appears for codes other than codes 20H to 7FH and A0H to DFH.
• For details, please refer to the B-852-TS22-QQ/QP-R External Equipment Interface Specification.
T20G30
XR;0200,0300,045
PC001;0A00,0300,