Filter
Top Products
2. SYSTEM MODE EO13-33003
2.1 Self-diagnostic Test
2-11
(5) SDRAM Capacity
SDRAM 16MB
(6) Sensor 1 Check
The status of the Ribbon Feed Motor Sensor, Ribbon Take-up Motor Sensor, Cutter Home Position
Switch, and Head Up Sensor are printed.
SENSOR1 00000000, 0 1 1 1 0 0 0 1
Sensor/Switch Print status description
Head up sensor Detects the Open or Close status of the print head.
Cutter home position sensor Indicates whether or not the cutter is at the home position.
Ribbon take-up motor sensor
Ribbon feed motor sensor
Controls ribbon motor rotation by detecting the slit on the ribbon
take-up motor and the ribbon feed motor. Indicates the position
of the slit sensor.
Capacity of DRAM
System/drawing memory
Head up sensor status
1: The pinch roller is closed.
NOTE: If either the pinch roller or the
p
rint head
is opened, printing is not performed.
Cutter home position sensor status
0: Home position
1: Other position
Fixed to 0.
Ribbon take-up motor sensor status
0: The detecting point is positioned outside the slit.
1: The detecting point is positioned inside the slit.
Fixed to 0.
Ribbon feed motor sensor status 1
0: The detecting point is positioned outside the slit.
1: The detecting point is positioned inside the slit.
Fixed to 0.
Fixed to 0.
Ribbon feed motor sensor status 2
0: The detecting point is positioned outside the slit.
1: The detecting point is positioned inside the slit.