Filter
Top Products
2. SYSTEM MODE EO13-33003
2.6 RAM Clear
2-54
2.6.2 No RAM Clear
Press the [PAUSE] key. No RAM Clear operation is performed and the display returns to “<6>RAM
CLEAR”.
Pressing the [PAUSE] key again causes the display to return to “NO RAM CLEAR”.
2.6.3 Maintenance Counter Clear
Press the [PAUSE] key to perform the Maintenance Counter Clear.
When the Maintenance Counter Clear is completed, the following message appears.
Turn off the printer to exit this mode.
Initial values after clearing the maintenance counter (MANTE.CNT CLEAR)
Item Initial Value
Label distance covered
0 km
Print distance 0 km
Cut count 0 time
Ribbon motor drive time 0 hours
RS-232C hardware error count 0
System error count 0
Momentary power failure count 0
2.6.4 Printer Parameter Clear
Choose a Printer Parameter Clear menu between ”QQ TYPE“ and “QP TYPE”.
Press the [PAUSE] key to perform a Printer Parameter Clear.
When the Printer Parameter Clear is completed, the following message appears.
Turn off the printer to exit this mode.
MAINTE.CNT CLEAR
*** COMPLETE ***
NO RAM CLEAR
PARAMETER CLEAR
*** COMPLETE ***
*** QQ TYPE ***
*** QP TYPE ***
[RESTART]
[FEED]
QQ TYPE (North America, Latin America)
QP TYPE (Europe, Asia, China)