TOSHIBA
DYNAMIC BRAKING 142 Dynamic braking selection 0: No DBR used - 0 9-15
SELECTION 1: DBR used. Drive's
DBR OL protect off.
2: DBR used. Drive's
DBR OL protect on.
BRAKING RESISTOR 143* DBR resistor value 1.0 - 1000 0.1 ohm ***** 9-15
VALUE
BRAKING RESISTOR 144* DBR capacity 0.01 - 600 0.01 kW ***** 9-15
POWER RATING
OVERVOLTAGE STALL 145 Overvoltage stall protection 0: On - 0 9-16
PROTECTION 1: Off
DC INJECTION START 146 DC injection starting frequency 0 - 120 ** 0.1/0.01 Hz 0.0 9-17
FREQUENCY
DC INJECTION CURRENT 147** DC injection current 0 - 100% or amps 1 %/A 0 9-17
MAGNITUDE
DC INJECTION TIME 148** DC injection time 0 - 10 0.1 sec 0.0 9-17
FWD/REV DC INJECTION 149 DC injection during 0: Off - 0 9-17
PRIORITY CTRL direction change 1: On
MOTOR SHAFT 150 continuous DC trickle 0: Off - 0 9-17
STATIONARY CTRL 1: On
EMERGENCY OFF MODE 151 Emergency stop selection 0: Coast to stop - 0 9-17
SELECTION 1: Decelerated stop
2: DC injection
stop ***
EMERGENCY OFF DC 152*** Emergency stop DC injection time 0 - 10 0.1 sec 0.1 9-17
INJECTION TIME
NUMBER OF RETRY 153 Retry selection 0: No retry - 0 9-17
ATTEMPTS 1: Retry 1 time ****
2: Retry 2 times ****
3: Retry 3 times ****
4: Retry 4 times ****
5: Retry 5 times ****
6: Retry 6 times ****
7: Retry 7 times ****
8: Retry 8 times ****
9: Retry 9 times ****
10:Retry 10 times ****
TIME BETWEEN RETRY 154 Retry time setting 0.0 - 10 0.1 sec 1.0 9-17
ATTEMPTS ****
8 - 13
GROUP:PROTECTION PARAMETERS
PARAMETER
DESCRIPTION
LIQUID CRYSTAL DISPLAY ADJUSTMENT
RANGE
ITEM
NO.
PAGE
NO.
DISPLAY
RESOLUTION
FACTORY
SETTING
Table continued on next page
*Items 143 - 144 are available only when Item 142 Adjustment Range option 2 is selected.
** Items 147 - 148 are available only when Item 146 Adjustment Range is set to other than "0".
*** Item 152 is available only when Item 151 Adjustment Range option 2 is selected.
**** Item 154 is available only when Item 153 Adjustment Range options 1 - 10 are selected.
***** Default wattage and ohm values depend on the inverter size.