Filter
Top Products
TOSHIBA
OVERTORQUE TRIP 170 Overtorque detection can cause 0: Trip disabled - 0 9-19
SELECTION a warning or a trip 1: Trip enabled
OVERTORQUE TRIP 171 Overtorque trip level 10-200% or amps 1%/A 150 9-19
LEVEL
FAULT TRIP EEPROM 172 Fault trip saving 0: Fault - 0 9-19
SAVE ENABLE cleared when
power cycled
1: Fault display
retained when
power cycled*
COOLING FAN CONTROL 173 Cooling fan control selection 0: Automatic fan - 0 9-19
SELECTION 1: Fan always on
CUMULATIVE RUN TIMER 174 Cumulative run timer alarm setting 0.00 - 999.9 0.02 175.0 9-19
ALARM SETTING (.01 = 1 hour)
8 - 15
GROUP:PROTECTION PARAMETERS (cont'd)
PARAMETER
DESCRIPTION
LIQUID CRYSTAL DISPLAY ADJUSTMENT
RANGE
ITEM
NO.
PAGE
NO.
DISPLAY
RESOLUTION
FACTORY
SETTING
*This parameter disables the retry function (see Items 153 and 154).