4.4 Expansion Memory 4 Replacement Procedures
4.4 Expansion Memory
Removing the Expansion Memory
To remove the expansion memory, follow the steps below.
1. Turn the computer upside down.
2. Remove the two embedded screws securing the expansion memory cover.
Figure 4-3 Removing expansion memory screws
3. Lift off the expansion memory cover.
4. Gently press out on the latches locking the expansion memory chip into slot A (the
bottom most one.) One end of the expansion memory will pop up.
Figure 4-4 Opening the expansion memory latches
Satellite A30 Series Maintenance Manual 4-9